How to make wood trimming sites

Hello, dear readers and self-relocities!

In almost every carpentry workshop there is always a lot of wooden trimming. They remain not only from the processing of boards, but also when cutting out various billets.

Of course, if it trimmed cheap wood, it is easier to send them to the furnace. But when it comes to valuable and beautiful rocks of wood, they simply become sorry to throw out them.

In this article, Ivan, the author of the one-name Youtube channel "Ivan Baev", will show the process of manufacturing simple seats from such trimming.

These homemakes are very simple for making even in a small carpentry workshop.

Materials

necessary for homemade.

- trimming wood

- carbon black,

sandpaper

, linseed oil.

Tools

used by the author.

— 

A circular saw

— 

Electric neuler

— 

Multi-speed clamp

— 

Orbital grinding machine

, drum grinding machine, fuganok, reysmaus

— 

Band-saw

— 

F-clamps

— 

Set of silicone tools for applying glue

Brush

— 

Galnik

,

Rule

, pencil.

Manufacturing process.

Due to the small size of the clips, it is easy for them to choose the material. For example, the author is trimming from cutting boards. Billets for boards were glued out of several slats of different varieties of wood.

First of all, the master spills the top edge of the blanks on the ribbon grinding machine.

The thickness of these smells is quite large, which allows them to dissolve them on the ribbon saw, and get two identical side walls. With a low thickness of the band saw blade, the drawing on both halves will be a practically perfect copy, due to which two napkiters with the same pattern on the sides can be made.

Footprints from treatment with a belt saw by a master eliminates, running them through the drum grinding machine.

Such a machine can be made independently, which was described in detail in several

articles

on that website.

For Rodyshek, the Master picked up suitable cutting of ski. Having gave them a rectangular shape, the author goes to a fugoval machine. He wants a little "reveal" the side walls. To do this, the parallel fugance is installed at a low angle, and the edges on the wide sides of the bottom step are stepping.

As a result, the profile of the bottom has a trapezoidal form.

Applying some glue to the scene of the connections, the author glues the walls to the bottom. To fix the position, they are shot by cloves with

Neulera

.

At the time of frozen glue, these products are clamping in F-shaped clamps with rubber linings on the sponges so as not to deform the surface. If such a napkin is manufactured in a single copy, it can be clamped in joinery.

The next day, the master equalizes the bottoms on Fuchke.

Then grinding surfaces and rounding of ribs. It uses a vibration type machine.

Now small round legs are glued, and the excess glue is deleted here

Combined brush-spatula

.

In order for the height of the pastened legs to be the same, and the product is not risen, the master grinds them on sandpaper pasted on glass.

Everything is ready, it remains to soak the products with flaxseed oil, and after a while, remove its surplus, and dried a couple of days. Such a finishing layer shows a natural texture of wood, and protects it from moisture exposure.

Interesting

recipe

Self-made natural oil-wax suggested Vladimir Natnik. Such impregnation can be safely used for processing products in contact with food products. It includes only two components, namely the richberry butter, and natural beeswax.

This cloth has both side walls made of apricot, and Rodyshko from the apple tree.

Here is another combination of varieties. Donyshko from acacia, and composite sidewols - from oak, nut and maple.

I thank Ivana for a good way to use wood trimming. So not only saving valuable material is achieved, but also excellent gifts are obtained.

Good mood, good health, and interesting ideas!

Copyright can be found here.

Source (Source)

Become an author of the site, publish your own articles, descriptions of homemade with payment for text.

Read more here

.

It is not always possible to choose accessories, perfectly fitted in the finished interior of the kitchen, living room or bedroom. However, if you make them with your own hands, it will not only deliver the joy of creativity, but also will make it possible to create really suitable and beautiful furnishings. One of these practical and pleasant looks of things, can be a bright beautiful cloth from cardboard. In this article we will tell you how to make a napkin with their own hands.

Original closets do it yourself

Making a cloth: Materials and tools Cardboard thickness 2-3 mm Color paper for internal and exterior finishes (approximately 2 sheets of A4 format) thick adhesive PVANDEX adhesive for connecting parts ("moment-crystal" or a hot glue gun) mounting tape (it is kraft ribbon) sharp scraper-knife knife (can also be used roller knife) ruler, pencil, circulat, brush for a glue-plating mate for cutting (if it is not at hand, take care of the preservation of the surface of the table in other ways) metal stationery clips or clothespins

Original closets do it yourself

How to create a napkin on your own

The template of the proposed closet is very simple, but it is convenient to use, and will help us familiarize yourself with some basic techniques of the cardboard, allowing you to create beautiful and practical caskets, organizers and boxes from ordinary cardboard.

From dense cardboard, cut out 4 semicircular blanks and 2 rectangular bottom parts.

Original closets do it yourself

You can change the size of the template to your liking and even vary the shape of the billets. I will cover the connection to the details. To do this, we need a wide mounting tape. We glue the online details of the bottom and walls, and the adhesive tape should fasten them both from the inner and from the outside.

Original closets do it yourself

Tip: You can decorate the cloth not only with colored paper, but also a bright cotton cloth. The algorithm of work in this case will remain exactly the same, however, before tight fabric, the outside of the cloth will preferably belayed with a layer of simple white paper. We would use the workpiece on color paper, making an allowance of at least 3 cm from all sides.

Original closets do it yourself

Bend colored paper and make a cardboard blank from the outside. We use PVA glue for this, trying so that there were no bloats, nor folds.

Original closets do it yourself

Now in the "Cover" should be made 4 wrap. For this, the pencil is extending the line of the inner fold of the clips on the allowance and we make cuts along it without reaching the end of the part 3-4 mm. Make small cuts diagonally to the edge of the cloth.

Original closets do it yourself

Locking glued on the inside of the cloth. After that, it is similar to cut the side parts of the "burns". We put the napkin on the side, we make a straight incision from the fold line, and retreating 3-4 mm from the edge, we complete the triangular cut. Now we make gear cuts on the edge with scissors, do not care about the edge of the cardboard parts about 4 cm. Otherwise, on the end can Neacocratic lumens for form.

Original closets do it yourself

Cuts are glued on the wrong side. So that the glue is better grabbed, for some time the bends can be segged with clothespins or stationery clips.

Original closets do it yourself

While the main detail dries, we return to the remaining cardboard billets. They must fit inside the already existing cloth, so they should be slightly reduced, cutting around 2 mm with a flat side of each of the semicircular parts and from one of the edges of the rectangle. Do not forget to check how the blanks approached, putting them inside the cloth. For the inner part of the cloth makes sense to choose the paper of another color. We glue the blanks on paper, making the allowances from all sides of at least 1.5 cm. Cut off the corner of 45 degrees and make zigzag cuts along the rounded edge of both parts, also, without reaching the very edge of the template.

Original closets do it yourself

We glue the side parts of the detail of the bottom, leaving the long parts free. On lateral details, bend and glue all the allowances. Now it remains only to connect the external and inner part of the cloth. To do this, first glue the detail of the bottom in such a way that the remaining non-glued batteries are fixed on the side walls. After that, we glue the side details using for this glue type "moment-crystal". When the glue was securely grabbed, our closet was ready to take its place at the dinner table and please the eye!

Original closets do it yourself

A source

Did you like the article? Subscribe to the channel to keep abreast of the most interesting materials

Subscribe

Painted by interest in my first master class on holes on a box in the technique of cardboard I decided to continue and today I will tell you how to make a napkin.

This product is much easier than the previous one, it can be made literally in 2-3 hours, therefore the text will be a bit, everything will be understood by the photo. If something is unclear - boldly write in the comments, I will explain.

About the necessary materials and tools, preparation for work I wrote here , I will not repeat.

So, on the basis of Croy, we have for a semicircle (= circle) and a rectangle - bottom.

I use a 2 mm thick cardboard.

I have a bottom of 14x4 cm in size, the radius of the circle is 7 cm.

Express Master Class Salnament in Engineering Cardboard, Photo No. 1

Cut the circle if there is no special knife-circula, you can cut a segmented knife, short movements, gradually cuttingle cardboard. You can not hurry - this is the key to success. Circle cut in half.

The billet is cut, we make copies from watercolor paper. For outdoor (what it is looking in the past MK, in Part 2 ) Paper blanks are equal to the size of cardboard details. For the inscription, I reduced the length of the bottom of 1 cm, and reduced the circle radius to 6.5 cm.

Express Master Class Salnament in Technique Cardboard, Photo № 2

We collect a blank on the glue moment, we glue the kraft paper joints inside and outside, how to do it in first part of MK .

Express Master Class Salnament in Technology Cardboard, Photo № 3

Before you get a paper workpiece from the outside, I decided to carve out out of the fabric

Express Master Class Salnament in Engineering Cardboard, Photo No. 4

A small digression from the topic: I have a fairly difficult fabric, because I had to cut separately sides and the bottom, to place the cups entirely on the sidewalls of the napkins. Therefore, the cut is so complicated.

Express Master Class Salnament in Engineering Cardboard, Photo No. 5

In general, you can cover the entire outdoor, spread the blanks on the fabric like this, but without spaces between parts.

Express Master Class Salnament in Engineering Cardboard, Photo No. 6

Make an allowance on the billet from 1.5 cm fabric from all sides. This option is easier and faster, does not require exhibit separately. If the cloth allows you to use this option!

Return to my work: I expect the sidewalls and bottom out of the fabric

Express Master Class Salnament in Technology Cardboard, Photo No. 7

I have a cardboard blank outside with paper sidewalls (see second part of the MK And do not forget about the roller, which we remove the surplus of the glue of the PVA!).

Express Master Class Salnament in Technology Cardboard, Photo No. 8

I leave the bottom at finally. Now we work only with external sidewalls. We take one side of the cloth (do not forget the rule: PVA glue to apply a brush, walk the roller, put a blank on the fabric (not the opposite !!), walk the stack or cloth over the surface).

Express Master Class Salnament in Technology Cardboard, Photo № 9

If you like some separate sidewings, do not forget to glue the fabric pieces on the bottom side to cover the cardboard cuts here:

Express Master Class Salnament in Engineering Cardboard, Photo No. 10

If you do one-piece outdoor from the fabric, you do not need this operation.

We begin on the bottom of the bottom of the bottom and glue it. Overweight the top edge by cloth, not reaching cardboard by 2-3 mm:

Express Master Class Salnament in Engineering Cardboard, Photo No. 11

We glue them inside the napkin, do not forget to lubricate a semi-dry brush with a cut of cardboard.

Express Master Class Salnament in Engineering Cardboard, Photo No. 12

We repeat for two sides, do not forget to gently put the fold at the bottom.

Express Master Class Salnament in Engineering Cardboard, Photo No. 13

If you have one-piece outdoor from the fabric, then it is necessary to make an incision for folding. How to make an incision: I draw a continuation of the inner joint and on this line at a distance of 2 mm (the thickness of the cardboard) draw a diagonal to the external parties of the product. I drawn here from the hands of the scheme, a red handle of the product was marked the jack of the product, and a solid line - the line of the outbreak (attention: the solid line is a continuation of dotted!), Between points 1 and 2 - diagonal. The resulting allowance is glued inside the product.

Express Master Class Salnament in Engineering Cardboard, Photo No. 14

Next, go to the inside. Checking how the sidewalls and the bottom of the box are included. If everything is fine, we glue paper blanks of adhesive on the fabric (do not forget the algorithm of the glue-roller stack algorithm).

Express Master Class Salnament in Technology Cardboard, Photo No. 15

Each detail is made by 1 cm from all sides. Cut. Overpending the sidewalls from above, cut off under 45 degrees, departing 1 mm from the edge, so that the paper would not be denaked. Rodyshko cut off from all sides under 45 degrees.

Express Master Class Salnament in Engineering Cardboard, Photo No. 16

Short Punches Punches stick to the opposite direction:

Express Master Class Salnament in Technology Cardboard, Photo No. 17

Insert the dyshko inside the box (lubricate the glue bottom and go a little on the sides, do not use the roller), sticks the side allowances on the sides

Express Master Class Salnament in Technology Cardboard, Photo No. 18

On lateral insides, all the allowances are glued on the opposite direction:

Express Master Class Salnament in Technology Cardboard, Photo № 19

Insert the sidewalls inside the cloth. Do not forget about the stack.

Express Master Class Salnament in Engineering Cardboard, Photo No. 20

Now the bottom is external. Measuring the width and length of the bottom, we cut a blank from watercolor paper, we glue on the fabric, we make an allowance of 1 cm on each side, cut off the corner of the under 45 degrees, retreating 1-2 mm from the edge,

Express Master Class Salnament in Technology Cardboard, Photo No. 21

We glue all the allowances on the bottom and glue the bottom to the napkin.

Express Master Class Salnament in Technology Cardboard, Photo No. 22

Ready! Enjoy.

Express Master Class Salnament in Engineering Cardboard, Photo No. 23

Express Master Class Salnament in Technology Cardboard, Photo No. 24

Express Master Class Salnament in Engineering Cardboard, Photo № 25

If you have questions - write in the comments. I will be pleased if you make your closet and show me in the comments.

I pay attention: no part of this MK, or it is entirely, no photo can be used without a hyperlink to this original source. I also ugly ask you if you want to share this MK - just give a link to this message. Please treat with understanding and appreciate my time spent on the creation of MK. Thank!

If during the table setting, you suddenly find that you do not have a napkin, do not be mistaken. It can be easily made with your own hands from any available material. For example, from cardboard. He is always in the house, and it is convenient to work with him.

Thanks to this publication, you will learn to do a variety of closets with your own hands - representing the whole 10 step-by-step master classes with unique photos and descriptions.

Salpa do it yourself

Salpae do it yourself from cardboard

Bright with openwork trim

Take a double-sided sheet of cardboard with a beautiful bright pattern. Cut a rectangle with a size of 10 x 3 cm. And 2 semicircles.

step 1

Glue all parts using a thermopystole (as shown in the photo).

Step 2.

Reduce the finished product with elements cut from a white shade openwork braid.

Step 3.

Such a napkin is suitable for napkins folded in half.

Step 5.

In the form of butterfly

From color double-sided cardboard cut 2 butterfly silhouette and 2 x 18 cm stripes. Bend it, as shown in the photo.

Butterfly 1.

Stick the strip on one of the butterflies using a thermopystole.

Butterfly 2.

And then apply hot glue on the rib stripes and secure the second butterfly.

Butterfly 3.

It turned out this is such a narrow napkin.

Butterfly 4.

It is better to put napkins twisted in the tube.

Butterfly 5.

Option for metal

Take a cardboard cylinder, which always remains from the roll of paper towels.

Under metal

Cut it on a width of 1 cm wide. There should be 8 pieces.

Under Metal 1.

Pour four blanks in the original form, and from the rest form asterisks. Insert the stars in the rings and fix them with PVA glue. Cut a piece of corrugated cardboard with a size of 5 x 3 cm ..

Under Metal 3.

Stick on it 2 rings on both sides.

Under Metal 4.

First, paint the craft in black, and then apply a little golden paint to the surface. Now the cardboard elements seem metal.

Under Metal 5.

White napkins look very beautiful in such a stand.

Under metal

Bright tubes

From double-sided cardboard with a bright print, cut 6 squares with a size of 10 x 10 cm ..

Bright tubes

Place them into the tube, turning around the cardboard cylinder and fixing the corners with superclaim.

Bright tubes 1.

Then all the tubes glue together in a circle and cut down the bottom corners. From the cardboard of the same shade, cut the circle with a diameter of 8 cm ..

Bright tubes 2.

Stick the tubes on it so that the sharp corners are on top. Reduce the craft of a satin ribbon and miniature flower.

Bright tubes 3.

In this stand for each napkin there is its place.

Bright tubes 4.

Stand for wipes from paper sticks with your own hands

Prepare paper sticks. They are easy to twist from the pages of the old magazine, turning around a thin long item. You will also need a piece of dense cardboard with a size of 4.5 x 12 cm.

From the tubes

Puck the rectangle with white paper from all sides. Two paper wands bend in half.

From the tubes 1.

Stick them on the sides of the white blank using PVA glue. Even cut two strips of 11 cm in size, 9 cm, 6 cm and 4 cm ..

From the tubes 2.

On one thing, glue them in descending order of the length for the previously formed side walls.

From the tubes 4.

Do the same manipulations and with the second game of paper stripes.

From the tubes 5.

Now it remains to paint the craft in blue. Use for this acrylic pearl paint.

From the tubes 6.

After drying the cloth is ready for use.

From the tubes 7.

As you can see, there will be no good work to make the original coasters under the napkins from the driving material for needlework - cardboard.

How to make girlfriend from girlfriend

If you like unusual and original things, then you can make cloths from pasta, branches of wood, multicolored pencils and even from plastic bottles (transparent or color). And now about everything in order.

Pasta Stand

For this stand under the napkin, you need to take pasta, which are called "wheels".

Pasta Stand

Put the plastic bag on the smooth surface and glue pasta on three rows of 7 pieces. Just apply from the side of the PVA glue and attach wheels to each other.

Pasta Stand 1

Then form 2 lateral walls. For this macaronly, glit vertically, reducing in each row to 1 piece.

Pasta Stand 2

Extend a slightly lower part of the napanert, delving 3 wheels.

Pasta Stand 3

Salnament is ready!

Pasta Stand 4

If you are confused by the type of pasta, they can be painted in any shade using a special paint in the canister.

Pasta Stand 5

Sal came from a transparent shampoo bottle with their own hands

Wash your empty bottle, then wipe it dry.

From transparent bottle

Cut the bottom and make side cuts.

From transparent bottle 2

Cut on curly edges, window on one of the faces and fringe on the sides.

From transparent bottle 3

Decorate the front part of the cracker. To do this, use acrylic paints of golden and blue shade.

From transparent bottle 4

Use this beautiful thing to be destined.

From transparent bottle 5

Stand for Wooden Napkins

With the help of a garden secator with a dry branch of any tree, cut the sticks with a length of 6-7 cm ..

From wooden sticks

Cut the rectangle from dense cardboard and stick 7 blanks on it using glue gun.

From wooden sticks 1

After that, 15 sticks are in a vertical position on one side of the bottom.

From wooden sticks 2

Do the same from the second side.

From wooden sticks 3

Reduce the craft of linen rope (stripes and bows), as well as slices of twigs.

From wooden sticks 5

The original clock is ready.

From wooden sticks 9

It is convenient to fit the napkins of a large format.

From colored plastic bottle

Take the yellow plastic bottle, wash it out and wipe dry.

From a colored bottle

Cut the lower part so that 2 symmetrical cocks with beaks and scallops are obtained.

From colored bottle 1

A black marker draw feathers, eyes, clavics with the outer and inside of the crafts. Scallops are caught with red plasticine or self-adhesive film.

From colored bottle 2

Napkins bend several times and place in the napkin.

From color bottle ready

From a white bottle, graceful swans are obtained, the orange is suitable for the manufacture of cats, and brown can become a material for a napkin with bears.

From multicolored pencils

Collect pencils of different shade up to 8-9 cm long, but not less than 4-5 cm. Clearly sharpen them.

From multicolored pencils

Cut the rectangular billet from a dense cardboard and take it from all sides with a beautiful bright paper.

From multicolored pencils 1

Decide with alternating colors of pencils.

From multicolored pencils 2

Stick them in a vertical position using a thermopystole. First on the one hand, then with the second.

From multicolored pencils 3

Decorate one wall of the napkin, the shortest pencil.

From multicolored pencils 5

It remains only to put the napkins and use them, enjoying the appearance of the crafts with their own hands.

These unusual closets can be made from different cast material.

Video master classes - how to make hands Beautiful napkitsa

How to make a dream catcher do it yourself here.

We do not always manage to choose the right and suitable accessories under the interior of the kitchen, bedroom or living room. Fortunately, they can always be made with their own hands. Homemade accessories will perfectly fit into the design of the room. Additional plus them - such a thing will be unique. So you can be sure that none of the acquaintances will tell you what has the same accessory. Today we will tell about the ways of manufacture with their own hands a beautiful and bright cloth.

What are the options for closets?

There are a lot of options for self-made closets. They can be made of the following materials:

  • Disks;
  • Plywood (chipboard);
  • Cardboard;
  • Beads;
  • Paper;
  • Clothespins;
  • Tree;
  • Salted test;
  • Plastics
  • Plastics / Plastic Bottles.

Variations of crafts in the photo

Disks

Cardboard

Beads

Paper

Clothespins

Wood

Salty dough

Plastic

We will consider the process of creating the most popular options - carcases from cardboard, discs and chipboard. Make them quite simple.

From cardboard

You can create such a napanerter very quickly, and you will not need any special skills.

The assembly template of the Cardboard Salf's proposed us is very simple. Having created such an accessory, you will parallelly master several basic techniques of cardboard. In the future, they will help you make beautiful and unusual decorative boxes, boxes and more.

Materials and tools

All this we need to work

  • Dense cardboard with a thickness of 3-4 millimeters;
  • Colored paper (need for internal and external trim). Approximately 3 sheets of A4 format;
  • PVA glue;
  • Reliable adhesive for gluing parts (suitable "moment"). More convenient to use a hot glue gun;
  • Tape for mounting (in other words, kraft tape);
  • Scissors;
  • Roller knife (with its absence to use the usual stationery);
  • Ruler, marker or pencil, cirkul, brush for glue;
  • Self-repairing mat for cutting (if there is no, take care of the safety of the table in other ways);
  • Metal stationery either ordinary clothespins.

Step-by-step instruction

  1. Take a tight cardboard and cut out 4 semicircular shape blanks (for walls) and 2 rectangular (for the bottom). The size of the blanks can determine by themselves, it concerns the form.
  2. Getting Started with details. Take a wide mounting ribbon and glue it all the junctions of the bottom and walls. The tape should fasten them with outdoor, and from the inside.
  3. Circuit shape on the form of blanks on a sheet of colored paper. Then make the allowance of at least 4 centimeters on each side.
  4. Bend colored paper and cross it a cardboard blank from the outside. To do this, use PVA glue. Try so that there are no volatile and folds on paper.
  5. Then make a 4 cut on the cover. For this, a marker or pencil will extend the inner folding line of your clips to the allowance and make it cuts, slightly not reaching the end of the part (approximately 3-4 millimeters). Still do shorts diagonally to the edge of the product.
  6. Get the allowance on the inside of the cloth. Then it is similar to cut the side parts of the "cover". Put the product on the side and make a straight incision from the fold line. Return 4 millimeters from the edge and complete the triangular cut.
  7. At the edges, make gear cuts, not a bit no darling to the edge of the cardboard part (about 4 centimeters). If you do not do that, inactive lumens may appear on the end.
  8. These teeth are sticking to the inside. In order for the glue better to take, for a while, press the bend with clothespins or stationery hostesses.
  9. While the main part dries, go back to the other blanks from the cardboard. They should be placed inside your cloth. Therefore, make them a little less, cutting off about 2 millimeters from a flat side of each semicircular part and one edge of the rectangle. Do not forget to check the warmed option, trying to put them inside the napkin.
  10. For the inside of your product, take colored paper of any other color. Stick paper blanks, leaving the seizures of at least 2 centimeters on each side. Cut the edges at an angle of 45 ° and make zigzag cuts along the rounded edge of both parts, also a bit no reaching the edge of the template.
  11. Stick the side parts of the bottom detail, leave the long parts free. In the side parts, bend and glue all available allowances.
  12. Now you can only connect the external and inside of your product. To do this, first glue the bottom so that the remaining previously not glued allowances were fixed on the side walls. Then attach the lateral parts using the "moment" glue.

Useful advice: To re-establish your closets, you can not only with the help of colored paper, but also any cotton cloth. The sequence of work remains unchanged, however, before fixing the fabric to the cloth, stick to the workpiece the usual white paper.

Photo Guide

Illustration to clause 1

Illustration to clause 2

Illustration to clause 3

Illustration to clause 4

Illustration to clause 5

Illustration to paragraphs 6-7

Illustration to clause 8

Creating a cloth completed, congratulations!

From disk

Such a napkin will decorate the interior of your kitchen

Now consider another very interesting option to create a cloth. It will consist of CDs, which for sure in a considerable amount attend every person at home. Believe me, even if you first do something like that, everything will work out the first time! You will not need any special skills, because everything is very simple.

Materials and tools

All this will be required for us to work.

For the manufacture of such a cloth from compact discs, you will need the following materials:

  • CDs (2 pieces);
  • Scissors;
  • Line;
  • Marker or pencil;
  • Several sheets of colored paper;
  • Dense cardboard of any color;
  • PVA glue;
  • Glue "moment";
  • Stationery knife;
  • Varnish, to cover the finished product;
  • Decorative elements at your discretion (in our example there will be ribbons and butterflies).

If you have any of the above materials at your hand, it is not trouble, they can always be replaced with any others.

Step-by-step instruction

  1. The first thing you need to do is trim discs. They will serve you the basis for your closet, so decide which height it should have. Mark the desired marker (best permanent) and draw a flat line with a ruler.
  2. Take the scissors and gently cut the drive on the edges marked. From the first time it is better to do it with a small allowance so that in the case of the presence of irregularities you could then enhance them.
  3. Prepare several newspaper pieces of small size.
  4. With the help of PVA glue, creeps the holes on the disks on both sides. Start the attachment of several layers of the newspaper. Each layer must be thoroughly scolded with glue. Put them aside until complete drying. Please note that while glue will dry, irregularities may appear on the surface. Try to accurately straighten them until the basis is still wet, and watch this problem to the end of the drying is not repeated.
  5. While the disks dry out, do the bottom of the cloth. Take the cardboard (better if it is dense), which will give the necessary shape and stability to your product. If there is no thick cardboard at hand - you can glue a thinner in several layers of PVA glue. After that, the density will be sufficient.
  6. After the cardboard is completely dry, it will become stable and durable.
  7. Now make it possible to decorate your cloth. In our example, this color gift paper. Cut a couple of details of the same size as the walls of the product. Other 2 details Make 5 millimeters more on each side, leaving a place to bend.
  8. With the help of glue, PVA will cross the side pieces of the cloth.
  9. Get decorating. At this stage, show your fantasy. You can use absolutely any materials and items that are at home - for example, beads, beads, lace, ribbons, bows, etc. Our example uses napkins for decoupage with butterflies. Stick the selected decorative element using PVA glue.
  10. After the bottom of the cloth will completely dry and become hard, plunder it with colored paper.
  11. Now collect all the details together. To do this, use the silicone pistol or "moment" glue.
  12. Cover the cradle with several layers of varnish. You can use glossy if you want the surface of the cloves to be shiny. But, in principle, perform this item is optional.
  13. Continue decoking. Place the bottom of the product with a volumetric ribbon. The junction of the tape can be hidden under other decorative elements.

Useful information: Pay attention to the fact that when applied, it can take stripes. Do not worry - when it is completely dry, they will come, and the surface will be perfectly smooth. Photography

Illustration to points 1-2

Illustration to items 3-4

Illustration to paragraphs 5-6

Illustration to clause 7

Illustration to clause 8

Illustration to clause 9

Illustration to clause 10

Illustration to paragraphs 11-12

Illustration to clause 13

Congratulations, you just created a beautiful and unusual kitchen accessory. It is very convenient to place and small and large napkins.

From chipboard

Such a napkin can give a girl on February 14

Finally, we bring to your attention another option to create a napanert. It is made of chipboard. Immediately, we note that this material can successfully replace ordinary plywood.

Materials

  • Sheet chipboard;
  • Lobzik;
  • Drill
  • Sandpaper;
  • Adhesive for wood;
  • Paint.

Step-by-step instruction

  1. Draw the contours of the future product. Its length in our example is 145x75 millimeters, the depth is 28 millimeters.
  2. With the help of jigsaw, make the first workpiece.
  3. We start drinking the heart in the center of the cloth. To do this, first drill the hole. Enter the Pillet into it and cut the figure as a heart. Optionally, you can choose any other cutout form.
  4. Having made the first workpiece, a pencil, mark the contours for drinking the second half of the napanert.
  5. Decide which width to have connecting strips. The optimal option is from 12 to 15 millimeters. Drink them.
  6. Check the resulting kit for compatibility. Combine all parts. If necessary, cut extra ledges that interfere.
  7. Collect the edges of the blanks by sandpaper.
  8. Check out the prefabricated design. If everything is perfect, glue parts together with a piece of wood. Give the details to dry. When gluing, you can squeeze the walls of the clamp.
  9. Finally, paint the product in any color. In our example, a red paint was used.

Useful information: If you want to create a napanert in the style of Provence, use the white paint, and then slide the sandpaper slightly. Note that it is possible to cry and grind all the details separately, even before the connection.

Start steps (photo)

Sketch of lateral wall

Hole for drinking

Heart sawing process

Coloring of individual details

All elements of the clips

Assembling the cloth

Crafts from chipboard ready!

Decorating the finished product

It is absolutely different ways to decorate the closet. No restrictions, it all depends on your imagination. Different beads, ribbons, pebbles, special figures, decoupage materials, paper, feathers, leaves, decorative flowers and more are suitable for decorating. If you wish to make a kitchen ornament, which will be perfectly combined with the common style of the room, you should choose the most accurately as possible and choose harmonious decorations. They can be created almost from any material. If you do not have the opportunity to do this, go to specialized stores, where the widest range of decorating elements is presented.

Make a beautiful and stylish venue with your own hands is absolutely difficult. The main thing is that you have the desire to create a quality product that can add the interior of your kitchen. We hope our master class will help you to do all the work quickly and efficiently. Finally, we note that the homemade exclusive can become an excellent gift, still handmade, in the process of which you put all your soul in the product, is valued very high.

Rate article:

(4 votes, average: 3 of 5)

Share with friends!

Good day!

An integral part of the table, at least the majority, are napkins. But they also want to post a beautiful. Personally, I really love bright napkins, I always have on the table on the table. But you need to place them, somehow interesting. The stand under the napkins is quite possible to make the sirred materials themselves, which is in every home. Materials like wooden clothespins, cardboard, plastic jars, cutlery, old discs. Even from handicraft, simple materials you can make the stand original and beautiful. Fantasize, create, decorate your table!

An even more interesting you will find on my channel, here .

From wooden clothespins.

Various crafts from ordinary wooden clothespins are very popular, look very nice and original. From such clothespins, wonderful coasters for napkins will turn out, these are cute fans and quite practical. The main thing is to remove metal parts from clothespins. Glit them to each other with thinner edges (as in the photo), the basis also their clothespins. A methods for the location of wooden parts are several, for example, two parts glue with flat sides or just glue in a row fan, placing parts equally. How interesting, to solve you. If you wish, you can dump the paint the color you like or use the remains of acrylic paint that remain from the pictures by numbers.

Salpae from girlfriend

From cardboard.

The most common material, cardboard. He is definitely in every house, for example, from any box. You can use cardboard any, both corrugated (from simple boxes) and just a dense cardboard. Draw a template, two parts with a rounded side, one rectangular for the bottom (sizes in the photo). The main thing is to decorate. You can enclose with tissue, ribbons, various figures, how more like it. And, in general, according to a similar principle, you can make a napkin for any form, the sidewall is not rounded, but in the form of a crown, butterfly, any figure.

Salpae from girlfriend

From old disks.

The principle of creation, like a cardboard cloth. It will take three disks. You can use a whole disk or strip as from cardboard. The top is better attached to a cloth or a napkin so that the hole in the disk is not visible, and or rather hide it. So it will look much more interesting.

Salpae from girlfriend

From plastic jars.

This includes jars from under shampoo, rinsers, dishwashing products, any plastic jars, the main thing that they were beautiful form or bright. From one such bottle, two full-fledged coasters for napkins will completely come out. One of the top, the other from the bottom. The decor can be any, what soul is pleasing, well, or what is in stock. It can be decorative flowers, leaflets, twigs, ribbons, beads. Fantasize!

Salpae from girlfriend

From cutlery.

Very creatine and unusual coasters for napkins will be made from cutlery, such as spoons and forks. Well, if someone will leave indifferent such cute little men, hardly. And the guest glance will not be able to take away.

More about products from cutlery, you can see on my channel, here .

Salpae from girlfriend

Even from unnecessary materials, if desired, it is possible to create the necessary interior decor or beautiful and useful crafts. The main thing is not to be afraid to experiment, but to create for the soul and from the soul. Create with pleasure, with a good mood, with enthusiasm. And you will definitely work out!

Creative success to you and good luck in all endeavors!

P.S. All photos in the work are used exclusively to illustrate the written and are in general internet access.

Thank you for reading the article to the end.

Salpae from girlfriend

I liked the article, put a like and subscribe to my channel, I will be very nice. Thanks to all!

Today I will show you how it is easy and simply you can make a napkin from materials that will probably find in every home. For the manufacture, you will not need any additional skills, so if you wish, you can use a child.

What do we need in work?

- 2 pcs discs

- scissors

- ruler

- Pencil

- Marker

- Colored paper

- Tight cardboard

- PVA glue

- glue moment crystal

- glossy lacquer

-

Decor

(I have tapes and butterflies)

We will need in work

If some materials are missing, then I think, manifesting the smelter, they can be replaced by something else.

Begin. The first thing we need to do is trim discs. Fortunately, we use discs more and less discs, so I think that in every house there is a couple of old unnecessary discs. As you already guessed, the discs will serve us the basis of our cloth, so I carefully measure the height of your desire. We celebrate the marker, it is desirable permnetable, black for a ruler.

Blacks for ruler

We take the scissors to stronger and more. I took the scissors from the kitchen set. Correctly cut.

cut off

We harm the scraps of small-sized newspapers.

scraps of newspapers

With the help of PVA glue, we stick the holes in the discs on both sides. Apply a few layers of the newspaper, missing each layer of glue. We leave until complete drying. Tip: In the process of drying, the newspaper on the surface of the disk can go waves. If this happens, straighten the newspaper with your fingers while it is wet.

While she is wet

While the discs dry, we will deal with the bottom of the cloth. To do this, we take a cardboard, preferably dense, it will give our closer sustainability. I, unfortunately, did not get tight cardboard. Therefore, I cut three strips from that cardboard that you managed to find in the bins, the dimensions of 10x2 cm.

Take it cardboard

Bonding them between the PVA glue.

Glue them with each other glue

Because My cardboard with an air layer inside, then it will be unstable and soft. I decided to poison the received bottom of the clutch of the newspapers and PVA glue. After drying, the bottom will become hard as plastic. We leave until complete drying.

Leave until complete drying

In the meantime, we will take the decoration of the cloth. I chose colored paper for packing gifts. Cut 2 parts exactly the same size as the walls of the cloth, and 2 parts by 5 mm more from all sides, leaving for bending.

leaving for bending

With the help of glue, PVA glue the boc of the napkin.

Purchase the sides of the SalnamentPurchase the sides of the Salnament

Decorating. At this stage, let your fantasy get roaring. Here you can use everything that is running at hand: beads, beads, ribbons, lace, bows, in general, everything your soul is. I found the remnants of napkins for the decoupage and cut out 4 butterflies, which, with the help of PVA, took their place on daisies.

Purchase the sides of the Salnament

When the bottom of the cloth will fool and become solid, we stick to it with colored paper.

Collect all the details

The moment of truth has come. We collect all the details in a bunch. To do this, you can use a silicone pistol. But I somehow did not work with him, so my choice fell on the moment the moment of the crystal.

Collect all the details

We cover our cloth 2 layers of varnish. I have acrylic glossy varnish. In principle, if desired, this stage can be missed. Important: When applied, the varnish can be slightly laminated. Do not worry, after drying the band will disappear and you will have an even glossy surface.

Decorate

We continue to decorate. I pasted the bottom of the clutter around the perimeter with a volumetric ribbon.

Decorate

The junction of the tape hidden a cow under God's bed (remained from a presented bouquet of flowers).

Decorate

And here is the result of our work!

Decorate

As you can see, in this napkin, it is very conveniently placed both small and large napkins.

SalnamentSalpae from girlfriend

But another idea for inspiration.

Salpae from girlfriend

This napkin is made on the same principle, only instead of colored paper I used a napkin for decoupage.

Добавить комментарий